EasyManua.ls Logo

Puch Maxi - Two-Stroke Mixture Preparation

Puch Maxi
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Filling
up
with
two
stroke
mixture
All
MAXI engines must be
run
with a gas/oil mixture (regular gas).
The recommended mixing ratio is 50 : 1 when using special Maxi
Mix two stroke moped
oil.
If
another
oil
is
used please refer to the
fuel mixing chart.
NOTE:
DO
NOT
USE
UNLEADED
GASOLINE
PUGH
MAXI MIX
50
: 1 OIL MIXING TABLE
To 5
gallons gasoline add 12
fl.
oz. (379 cc) oil
To 1 gallon gasoline add 2.4
fl.
oz.
(76 cc) oil
To 1 quart gasoline add
.6
fl.
oz.
(19
cc)
oil
NOTE:
To reduce carbon build-up within the engine and exhaust system,
we
strongly recommend the use of the special 2 stroke MAXI
MIX oil,
50 : 1 ratio. However
as
an
emergency measure,
a
regular 2 stroke
oil
can
be
mixed
in
a 25 : 1 ratio as shown
below.
25 : 1 OIL MIXING TABLE (REGULAR TWO STROKE OIL)
To 5 gallons of gasoline add
24
fl.
oz. (757 cc)
oil
To 1 gallon of gasoline add 4,8
fl.
oz.
(151
cc)
oil
To 1 quart of gasoline add 1,2
fl.
oz.
(38 cc) oil

Other manuals for Puch Maxi

Related product manuals