Puch Maxi - Owner Maintenance; Spark Plug Service

i
I
l
• j
H) OWNER MAINTENANCE
Spark plug
To check if plug is functioning properly, proceed as follows:
Disconnect plug wire from plug
Unscrew plug
Reconnect plug wire to plug and ground
same
on cylinder head
WARNING ENSURE THAT NO FUEL IS ON
WARNING ENGINE AND/OR FLOOR
WARNING BEFORE PROCEDING
Continue as if starting engine and check for
a strong
blue spark at electrode
If no spark, clean or replace spark plug
Note: Gap .016- .020 in.
(0.4- 0.5 mm)
Recommended spark
plugs
Bosch
NGK
1
HP-AII
W 1 0 A (W 95 T 1)
B-4H
Champion L
90
Alu. chrome
1 ,5
HP-cylinder
W 8 A (W 145 T 1)
B-5HS
L 88 A
Hi torque
1 ,5 HP - cylinder
W 7 A (W 175 T 1)
8-6 H or 8-6 HS
L 86
2 HP - AII
W 7 A (W 175 T 1 )
B-6 H or B-6
HS
L 86
23