Need help?Do you have a question about the Pudu BellaBot BL100 and is the answer not in the manual?
General| Model | BellaBot BL100 |
|---|---|
| Type | Service Robot |
| Manufacturer | Pudu Robotics |
| Tray Quantity | 4 |
| Operating Environment | Indoor |
| Voice Interaction | Yes |
| Automatic Charging | Yes |
| Minimum Aisle Width | 800 mm |
| Navigation | SLAM (Simultaneous Localization and Mapping) |
| Operating Temperature | 0 to 40 °C |
| Communication | Wi-Fi |
| Display | Touchscreen |
| Application | Restaurants, hotels, hospitals |
| Battery Capacity | 24 V, 20 Ah |
Adjust food delivery and cruise speeds for optimal performance.
Keep trays and wheels clean to ensure smooth operation.
Inspect and clean positioning and obstacle avoidance sensors regularly.
Maintain the robot's exterior cleanliness and avoid improper handling.
Steps to resolve issues when the robot's self-test fails.
Solutions for common problems like stopping during operation or signal loss.
Solutions for when the robot unexpectedly stops during tasks.
Steps to address issues when the robot fails to boot or pass self-tests.
Instructions for when the robot loses its positioning signal.
Steps to diagnose and fix issues with the robot failing to start.
Details on Pudu Technology's warranty policy and coverage.
Requirements that must be met to qualify for free warranty service.
Situations and damages not covered by the product's warranty.
Maintaining battery power above 10% for optimal performance.
Guidelines for charging the robot, including battery installation and charger usage.
Important safety measures during battery charging and replacement.
Rules for placing items on trays and avoiding flammables.
Precautions during cleaning, speed adjustment, and task execution.
How to use the emergency stop and handle invalid screen operations.
Guidelines for operating environment, temperature, and ground hazards.
Details on voltage, power, charging, battery, speed, and dimensions.
How to charge the robot and maintain battery levels.
Steps for powering the robot on, off, and initiating tasks.
Troubleshooting guide for robot alarm states and corresponding actions.
How to immediately stop the robot in case of an emergency.
Functionality of the key switch for turning the robot on/off and locking.
Details on warranty coverage, requirements, and what is not covered.
How to contact support and the typical service workflow.
Information for contacting Pudu Technology's after-sales service.
Specific warranty durations for different robot parts.
To Next Page
