Pudu CC1 - Product Introduction

1009
2.1 Packing list
2.2 Appearance introduction
Charging pile machine (excluding power adapter) × 1, power cord × 1, instruction manual × 1,
clean water pipe × 1, sewage pipe × 1.
Product introduction
5. The pressure of clean water is 0.1-0.6mpa.
6. The height of the sewage outlet is not more than 0.5m from the ground.
QR code board
Front shell
Sink
Detergent cover
pressure valve cover
Rear cover
Power adapter
compartment side cover
Status light
Sewage transfer box
Inlet pipe
Sewage pipe
Bottom plate
Electrode holder
3.1 Instructions for use
Product use
2.3 Performance parameters
Product Characteristics Description
Product Name CC1 Docking Station
Product function Support robot automatic adding and draining, automatic
charging, automatic injection of cleaning agent
Body size 404mm x 274mm x 497mm (L, W, H)
Body weight 20 kg
Input voltage 90~264V AC
Output voltage DC24V
Working temperature 0~40℃
Working humidity ≤ 90%（40℃）
Storage temperature -20℃ ~70℃
Communication method Bluetooth
Installation requirements Ground 󽗉xed or back against the wall 󽗉xed
External dependencies External dependencies Water source, 󽗊oor drain, power supply
・Connect one end of the water inlet pipe to the water inlet of the workstation, and the other end to
the clean water source;
Connect one end of the sewage pipe to the drainage outlet of the workstation, and place the other
end at the sewage discharge place.（as shown below)