Puhui T-960 - Technical Parameters

LED New Light Source Reflow Oven T-960
2
7. Transmission system adopt imported frequency conversion motor, PID
closed-loop speed, equip with all the import 1:150 turbine speed reducer, smooth
operation, speed adjustable range 0-1600mm/min.
8. Adopt independent wheel structure and special stainless steel strut, durable
wear-resisting runs smoothly, speed precision can reach ±10mm/min.
9. Independent cooling zone, to ensure the PCB board of low temperature when the
required.
10. Friendly human-machine operation interface, perfect LCD display, no need to
connect with the PC, can watch the whole repairing process very clearly.
11. Ergonomic design, practical and easily operated. Good build quality but at the
same time light weight and a small footprint allows the T-960 to be easily bench
positioned, transported or stored.
Technical parameters
Model
T-960
The heating zone quantity
upper3/down2
The length of the heating zone
960mm
The heating type
intelligent level sirocco and rapid infrared heating
The cooling zone quantity
1
Maximum width of PCB board
300MM
The operation direction
left→right
Delivery options
Net transmission＋chain transmission
The speed of conveyer belt
0-1600mm/min
The power supply
Three phase 5 line 380V 50/60Hz
Peak power
4.5KW
Heating up time
Around 15mins