LED SMT Reflow Oven T-980 User Manual
Https://www.te168.com
11
/
11
net-belt position. Cannot make it be lock or fall off.
4.6. Ensure the machine is stable, not lean or unstable. Adjust the leg under the
machine to keep the transmission horizontal. Or the PCB will shift in the transmit
process.
4.7. Do not put too big and big absorbed heat components into the oven avoiding
damage the net-belt and affect the temperature.
4.8. Put lubricating oil into the transmission chain every 7 days.
4.9. Do not put the inflammable and explosive dangerous goods near the reflow
oven.
4.10. Do not reach hands into the reflow oven when the machine is in normal
working condition.
Daily Maintenance
1. Keep the electrical control cabinet clean.
2. Check the fan shaft sleeve is in good condition.
3. Check the fan and the motor have abnormal sound.
4. Be sure the fan does work flexibly.
5. Check the air hole if there are abnormal materials.
6. Check the transmission net-belt is in good condition.
7. Check the electrical chest and electrical equipment have abnormal sound.
8. Check the transmission part if it is in good condition and has abnormal sound.
9. Before turn on the machine, please check the working voltage if it is in the safe
voltage and if it is stable. Ensure all the parts can work safely and normally. At the
same time, when turn on the machine, check the parameters are the same to the last
time turn off. When turn off the machine, do not let the transmission belt in the hot
area, please turn off the temperature and when cool down well and stop the
transmission belt.
10. Lubricate the driving rolls. Put lubricating oil every two months.
11. The motor works in high temperature for long time, please put lubricating oil
twice a week or more, ensure the motor can work normally.
12. Clean the residual goods on the fan blade and motor timely. Or the circuit ages
will lead to short circuit and damage the fan.
13. Be sure the machine contacts the earth when use five-wire system.
Statement: These images and screenshots in this product manual may very
slightly different from the actual purchased product.
Actual products shall prevail.
To Previous Page
Loading...
