Pullman Steam Works SC388L User Manual

3 Starting Up
Assembling the
3,1,1
Steam Hose
The steam hose with steam
8un
must be connected to the app iance
and the desired accessory must be attached before the steamer
can be used.
The
Steam Works has an accessories compaftment
that
holses
the
detail nozzle,
both brush nozzles, the
jet
nozze
and the 2-i.- l nozzle.
Open the
accessories
companment by
pulling
the
yelow
ocking
handl€
upwards and iftlng the transparent
cover of the accesso.ies companment off towards
the
front (Figs. 2
and 3).
Remove the required steam accessory and repace rhe cover. S ide the
nose
of
the
cover
into
the
recess
above the steam socket and
press
i!
down firmly at
rhe back lntilrh€ cover cllcks into
pace.
Flrst of al connect the steam hose to the steam socket on the fronr of
the Steam Works. To do this, flip the black cover flap down and push
the connector ofthe steam hose li|mly into rhe sream socker unti
it clicks
jnto
pace (Fig.4).
To remove the srcam hose, press in borh reease
and left hrnd sides oI
rhe
slear ronnecro- r-d p.l
socker
(Fi8.
s).
6

Pullman Steam Works SC388L Specifications

General

Brand	Pullman
Model	Steam Works SC388L
Category	Vacuum Cleaner
Language	English