Pullman Steam Works SC388L User Manual

3
Starting Up
3.1.2
Extension Tubes
3.1.3
Floor Nozzle
Assemble the extension hoses ifthe s|eam cleaner is to be used to cear
floors or difllcult to reach afeas. To do $is, prsh rhe open end ofa
tube
onto the steam
gun.
Push it onto the steam gun lnti the release
bltlon ofthe steam
gun
click into place (Fi& 6). Add one, two or all
three extension
tubes as required.
Press in the appropriate release
buttor and
pull
the tubes apaft with
a downward movement to rak€
the extension tube off again
(Fig.
4.
Attach the floor nozzle to Lhe end of the exrension r!be. Ensure
that the nozzle clicks imo place on assembly (Fig. 8). The floor noz e
is idea for cleaning washable wall and lloor coverings. lt may be
used with or without the ceaning coth. However, we recommend
using the cloth to
protect
covednSs ln the case of sensitlve surfaces
such as v/ood of linoleum. Place the fioor nozle on the cleaning cloth
and
secure the overhanging materia under the cleaninS coth clips
on the left
and right. Press on the inner sides of rhe yellow hoder.
fien open the
clips and the cleaning cloth can be secured in
place
(Fis. 9).
NATE:
fot
packaging
reasans.
Assenble the cannector
^
,6r
(a{
Iv
dt
,.V
To take the Jloor nozle off again, press in
the appropriate
release
button (see Fig. 7) and pull the nozle off with a downwa.d movement

Pullman Steam Works SC388L Specifications

General

Brand	Pullman
Model	Steam Works SC388L
Category	Vacuum Cleaner
Language	English