3
Starting Up
3.1.4
Accessory
Adaplor
3. t.5
Detail Nozzle
3.1.6
Jet Nozzle
The steam cleaner has a range
ofyery varied attachment nozles |o ena-
ble the most effecdve and thorough
cleaning ofdifferent surfaces. Firer
assemble the accessorrr/ adaDtor
so that these attachments can be
connected to th€ steam hose- The accessory
adapter can be attached
directly
to both the steam gun and rhe end of
one or more extension
Ensure that the adaptor is lirmly
pushed
on until it click! into place
(Fis.
l0).
Press in the approprlate release
button and pull apart wjth a
downward movement to take
the
The detail nozzle may be used on its own for
cleaning or may aso be
fitted
with
one ofthe brush nozles, the
iet
nozle
or the 2-in-l nozz-
l€.
This detail nozzle is attached using the bayonet principle.
Push the
nozzle
onto the accessory adaptor and give it a firm quarterturn
in the
directjon
ofthe arrow stamped on the nozle (Fig- | l).
Reverse the sequence to take
the
detail
nozle off aSain: wvist the noz-
le a
quafter
of a turn in the opposite
direcrion to the arrow and pull it
off with a downward movement.
Simply
push
the
jet
nozle firmly
onto the detail nozzle to anach it
(Fis.
l2). This nozzle makes it
possible
to clean hard to reach
places
such as corners,
joinLs
and
toiets with ease. The
jet
nozle
may
be remoYed by
pul
in8 it off
with a downward
movement.
K2"
Fig. 12
,
To Next Page
Loading...
Need help?
General
