Puls CD Series - Page 20

CD10.241
CD-Series
DC/DC Converter 24V/24V, 10A, 240W
Sep. 2019 / Rev. 1.4 DS-CD10.241-EN All values are typical figures specified at 24Vdc input voltage 24V, 10A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
20/27
21.2. ZM12.SIDE - SIDE MOUNT BRACKET
This ZM12.SIDE bracket is used to mount the device sideways with or without utilizing a DIN-rail to
save installation depth.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the
ZM12.SIDE steel bracket can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be
mounted on the ZM12.SIDE steel bracket.
Fig. 2-7
Side mounting
without DIN-rail brackets
Fig. 2-8
Side mounting
with DIN-rail brackets
Fig. 2-9
Hole pattern
All dimensions in mm