CD10.241
CD-Series
DC/DC Converter 24V/24V, 10A, 240W
Sep. 2019 / Rev. 1.4 DS-CD10.241-EN All values are typical figures specified at 24Vdc input voltage 24V, 10A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
19/27
CCESSORIES
21.1. ZM2.WALL – WALL/PANEL MOUNT BRACKET
These brackets are used to mount the device on a flat surface or panel without utilizing a DIN-rail. The brackets can be
mounted without detaching the DIN-rail brackets.
The order number ZM2.WALL contains two brackets needed for one device.
Fig. 1-1 ZM2.Wall Fig. 1-2 Hole pattern Fig. 1-3 Side view
All dimensions in mm
All dimensions in mm
Fig. 1-4 Isometric view Fig. 1-5 Isometric view Fig. 1-6 Isometric view
To Next Page
Loading...