Reset
Restore default settings
= Press and hold down the М (3) button to enter the
main menu.
= Select option “Settings” with the UP (2)/DOWN
(5) buttons. Press briefly М to confirm.
= Select option "Reset" with UP/DOWN. Press
briefly М to confirm.
= With a short press of the UP/ DOWN buttons
select “Yes” to restore default settings or “No”
to abort.
= Confirm selection with a brief press of the M
button.
= If “Yes” is selected, display will show “Return
default settings?” and “Yes” and “No” options.
Select “Yes” to restore default settings.
= If “No” is selected, action is aborted and you
return to the submenu.
The following settings will be restored to their
original values before changes made by the user:
= Operating mode of video recorder – video
= Unit’s operating mode – Forest
= Calibration mode – automatic
= Language – English
= Wi-Fi – off (default password)
= Magnification – off (no digital zoom)
= PiP – off
= Colour palette – White Hot
= Unit of measurement - metric
Warning: date and time settings, default pixel map
and remote control activation are not restored.
= Enter the Format submenu with a short press of
the M button.
= Press briefly М to confirm.
= With a short press of the UP/ DOWN buttons
select “Yes” to format the memory card or “No”
to return to the submenu.
= Confirm selection with a short press of the M
button.
Format
Formatting
This menu option allows you to format your device's
Flash card or memory card (erase all files from its
memory).
= Press and hold down the М (3) button to enter the
main menu.
= Select option “Settings” with the UP (2)/DOWN
(5) buttons. Press briefly М to confirm.
18
17
Rangefinder
Selection of reticle shape
Function “Target position angle” (TPA)
“THD” function
Menu item “Rangefinder” allows you to set up built-in rangefinder’s
parameters as follows:
џ Confirm selection with a brief press of the М (3) button.
џ Selected reticle will appear on the display.
џ The reticle will disappear from the display if the rangefinder is not used
longer than 4 seconds.
џ Function “TPA” allows you to change the angle of target location (angle
of elevation). When the function is activated, the angle is shown
continuously. When the function is disabled, the angle is shown if the
rangefinder is working. The angle is shown in a pop-up menu during
measurement.
џ Select to activate “TPA”.
џ Confirm selection with a brief press of the M (3) button.
џ “THD” function allows you to measure true horizontla distance to a
target based on the angle of elevation value.
џ Select to activate “THD”.
џ Confirm selection with a brief press of the M (3) button. Hereinafter
message THD will appear above the distance readings.
џ Select one of the three reticle shapes with the UP (2) and
DOWN (5) buttons.
= Enter the main menu with a long press of the M (3) button.
= Rangefinder MEnter the submenu " " with a short press of the button.
= parameter UP (2) DOWN (5) buttons.Set the desired with the and
LRF
= If “Yes” is selected, display will show “Do you want to format
memory card?” and “Yes” and “No” options. Select “Yes” to format
the memory card.
= Message «Memory card formatting» means that formatting is in
progress.
= Upon completion of formatting the message «Formatting
completed» is shown.
= If “No” is selected, formatting is aborted and you return to the
submenu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
