Pulsar ANALOGUE User Manual

ENGLISH
ANALOGUE WATCHES
■SCREW DOWN CROWN [for models with screw down crown]
1 Turn Crown counterclockwise until you no
longer feel the threads turning.
2 Crown can be pulled out.
Unlocking the crown
1 Push Crown back in to normal position.
2 Turn Crown clockwise while pressing it lightly
until tight.
Locking the crown
* When using the watch in water:
Before using the watch in water, be sure the crown is screwed in completely.
Do not operate the crown when the watch is wet or in water.

Pulsar ANALOGUE Specifications

General

Brand	Pulsar
Model	ANALOGUE
Category	Watch
Language	English

Summary

Screw Down Crown Operation

Unlocking the Crown

Turn counterclockwise until threads stop turning, then pull out.

Locking the Crown

Push crown in and turn clockwise until tight.

Water Resistance Precautions

Ensure crown is screwed in before water use; do not operate when wet.

Watch Starting and Time Setting

Start Mechanical Watch

Battery Change and Warnings

Battery Replacement

Battery inserted for testing; contact dealer for replacement.

Critical Battery Warnings

Do not remove, short-circuit, tamper with, or heat the battery.

Child Safety

Keep batteries out of reach of children; consult doctor if swallowed.

Water Resistance and Care

Non-Water Resistant Care

If wet, check with authorized dealer or service center.

Water Resistant Usage

Watch Durability and Maintenance

Shocks and Vibration

Chemical Exposure

Periodic Maintenance Check