EasyManuals Logo

Pulsar AS 150 User Manual

Pulsar AS 150
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Periodic Maintenance Information
Drive chain must be cleaned & lubricated as
per periodic maintenance schedule.
Drive Chain (O-ring type)
‘O’ rings must always be kept wet for
best performance hence lubricate every
500 Km.
O-ring chain lubrication can easily be
done by owners using Bajaj ‘Chain Lube
Spray Can’ available with Bajaj dealers,
or equivalent. Ensure that the lubricant
does not damage the rubber 'O' rings.
Method of O-ring Chain Lubrication :
Park vehicle perpendicular to the ground on level
surface as mentioned in page no. 21 (6.1). Clean
the chain by using lint free cloth (If excessive
mud / slush found approach Bajaj Service Center
for proper cleaning)
Shake the can vigorously by holding vertically
upright till the noise of steel ball inside heard
uniformly.
Hold spray can at the back of rear sprocket with
extension tube nose at 5~10 cm.
Rotate the wheel in reverse direction & spray the
lube on middle portion of the chain up to full
length of the chain.
Drive
Chain
Cleaning
Drive
Chain
Lubrication
28

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar AS 150 and is the answer not in the manual?

Pulsar AS 150 Specifications

General IconGeneral
Displacement149.5 cc
Fuel SystemCarburetor
Fuel Tank Capacity15 L
Compression Ratio9.5:1
Frame TypeDouble Cradle
Max Torque13.4 Nm @ 6000 rpm
Transmission5 Speed
Front SuspensionTelescopic
Front BrakeDisc
Rear BrakeDrum
ClutchWet Multiplate

Related product manuals