Pulsar AS 150 User Manual

2. Service Reminder Reset ( ) :
• ‘Wrench’ symbol glows when ODO meter reading
reached to set Kms.
This icon will glow at-
st nd
1 : 450 Kms 2 : 4450 Kms
rd th
3 : 9450 Kms 4 : 14450Kms
& subsequently at each 5000 Kms.
1. Trip Meter Reset :
• Mode & Set push button is provided for selecting &
resetting ‘ODO/TRIP1/TRIP2’. LHS part of speedo
console.
1.
Press 'Mode' button
for less than 2 sec.
Press 'Mode' button
for more than 15 sec.
Mode changes from
‘ODO/TRIP1/TRIP2’
Selected mode
‘TRIP1/TRIP2’ will get reset.
Other TRIP mode will
continue updating.
2.
Note : Engine & motorcycle speed should be zero.
Speedometer Setting
11
M
S
Mode
Service Reminder
TRIP1/2
Set

Pulsar AS 150 Specifications

General

Displacement	149.5 cc
Fuel System	Carburetor
Fuel Tank Capacity	15 L
Compression Ratio	9.5:1
Frame Type	Double Cradle
Max Torque	13.4 Nm @ 6000 rpm
Transmission	5 Speed
Front Suspension	Telescopic
Front Brake	Disc
Rear Brake	Drum
Clutch	Wet Multiplate