EasyManuals Logo

Pulsar Axion 2 XG35 User Manual

Pulsar Axion 2 XG35
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
6.
Wait until the battery is fully charged (LED indication (16):
).
Note: Two batteries can be charged at the same time, a second slot is
provided for it.
LED indication (16) in the
battery charging mode
Battery Level
Battery charge level is from
0% to 25%
Battery charge level is from
26% to 50%
Battery charge level is from
51% to 80%
Battery charge level is from
81% to 99%
Battery is fully charged.
Charging will automatically
stop. The battery can be
disconnected from the charger.
Defective battery. Do not use
the battery!
LED indication (16) in the
standby mode**
Battery Level
Battery charge level is from
0% to 25%
Battery charge level is from
26% to 50%
Battery charge level is from
51% to 80%
Battery charge level is from
81% to 99%

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar Axion 2 XG35 and is the answer not in the manual?

Pulsar Axion 2 XG35 Specifications

General IconGeneral
Thermal Sensitivity<40 mK
Frame Rate50 Hz
Objective LensF35/1.0
Sensor TypeUncooled Microbolometer
Display TypeAMOLED
Built-in Memory16 GB
Wi-Fi Channel2.4 GHz
Protection DegreeIPX7
Operating Temperature Range-25°C to +50°C
Power Supply3.0 - 4.2 V
Battery Capacity4900 mAh
Magnification2x - 8x
Detection Range1750 meters
Display Resolution1024x768 pixels
Video / Photo Resolution1024x768
Video / Photo FormatMP4 / JPG
Battery TypeLi-Ion
Sensor Resolution384x288 pixels

Related product manuals