EasyManuals Logo

Pulsar Axion 2 XG35 User Manual

Pulsar Axion 2 XG35
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Battery is fully charged. It can
be disconnected from the
charger.
Defective battery. Do not use
the battery!
* Available separately
** Standby mode is when the batteries are in the charger but the Power
Adapter is not connected. In this mode, the indicators are only on for 10
seconds.
Attention! When using a Power Adapter that does not support USB Power
Delivery fast charging technology, the flicker frequency of the LED
indicators decreases by a factor of 3 and the charge time increases.
Attention! The charger heats up during fast charging. Excess heat is
removed through the radiator and does not affect the device operation.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar Axion 2 XG35 and is the answer not in the manual?

Pulsar Axion 2 XG35 Specifications

General IconGeneral
Thermal Sensitivity<40 mK
Frame Rate50 Hz
Objective LensF35/1.0
Sensor TypeUncooled Microbolometer
Display TypeAMOLED
Built-in Memory16 GB
Wi-Fi Channel2.4 GHz
Protection DegreeIPX7
Operating Temperature Range-25°C to +50°C
Power Supply3.0 - 4.2 V
Battery Capacity4900 mAh
Magnification2x - 8x
Detection Range1750 meters
Display Resolution1024x768 pixels
Video / Photo Resolution1024x768
Video / Photo FormatMP4 / JPG
Battery TypeLi-Ion
Sensor Resolution384x288 pixels

Related product manuals