Name: Pulsar Axion XM30F
Brand: Pulsar
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Calibrate the image with a short press of the ON/OFF (5) button (where

calibration mode SA or M has been selected). Close the lens cap before manual

calibration.

Select the required amplification level (“Normal” , “High”

, “Ultra” ) by briefly pressing the UP (4) button.

Activate the quick menu by briefly pressing the MENU (3) button to adjust the

brightness, contrast and smooth digital zoom (for more details see the Quick Menu



section).

Turn the device off with a long press of the ON/OFF (5).

Attention! It is forbidden to point the riflescope lens at intensive energy sources,

such as laser radiation emitting devices or the sun. It can disable the riflescope

electronic components. Warranty does not cover damage arising from failure to comply

with the operating rules.

Questions and Answers:

Need help?

Do you have a question about the Pulsar Axion XM30F and is the answer not in the manual?

Pulsar Axion XM30F Specifications

General