Pulsar Axion XM30F User Manual

To turn on and off the PiP function see the PiP Mode section.
Press and hold the UP (4) button to change the magnification ratio in the PiPwindow.
The zoomed image is displayed in a dedicated window, while the image in the rest of
the screen is displayed at base magnification 3x.
When the PiP is turned on you can control both the discrete and smooth digital zoom.
In this case the zoom value changes only take place in the dedicated window.
When the PiP function is turned off, the screen will display at the magnification
that was set in PiPmode.

Pulsar Axion XM30F Specifications

General

Sensor Resolution	320x240
Display Type	AMOLED
Objective Lens Diameter	30 mm
Detection Range	1300 m
Pixel Pitch	12 µm
Objective Lens	F30/1.2
Digital Zoom	4x
Built-in Memory	16 GB
Wi-Fi	Yes
Protection Degree	IPX7
Power Supply	3.0-4.2 V
Battery Type	APS3
Weight	300 g
Display Resolution	640x400
Video/Photo Resolution	528x400
Video/Photo Format	jpg
Battery Life	5 hours
Operating Temperature	-25 … +50 °C