Pulsar Axion XM30F - Wi-Fi Connectivity and Usage

Wi-Fi Function
The device has a function enabling wireless communication with external devices
(smartphone or tablet) via Wi-Fi.
Turn on the wireless module in the WI-Fi Activation menu option.
Wi-Fi is displayed in the status bar as follows:
Indication on the status bar Connection Status
Wi-Fi is switched off
Wi-Fi connection is in progress
Wi-Fi is switched on, no connection
with device
Wi-Fi is switched on, device
connected
The device is recognized by an external device as AXION_XXXX where XXXX are the
four last digits of the serial number.
After entering the password on the external device (seePassword Setupsubsection
of theWi-Fi Settings section for more information on setting a password) and
setting up a connection, the icon in the status bar changes to .