Name: Pulsar Axion XM30F
Brand: Pulsar
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Perform the calibration according toCalibration Mode



section.

Black screen after calibration

Solution

If the image does not clear after calibration, you need to recalibrate.

The image is too dark

Possible cause

Brightness or contrast level is too low.

Solution

Adjust the brightness or contrast level in the Quick Menu.

Poor image quality / Detection range reduced

Possible cause

These problems may occur during observation in adverse weather conditions (snow,

rain, fog, etc.).

Smartphone or tablet PC cannot be connected to the device

Possible cause

Device password has been changed.

Solution

Delete the network and connect again using the password saved in the device.



Possible cause

The device is in an area with too many Wi-Fi networks that may be causing signal

interference.

Solution

To ensure a stable Wi-Fi connection, relocate the device to an area with fewer or no

Questions and Answers:

Need help?

Do you have a question about the Pulsar Axion XM30F and is the answer not in the manual?

Pulsar Axion XM30F Specifications

General