Pulsar CAL. VD53 - Battery Replacement Procedure

English
11
HOUR.
24
6
12
18
60
45 15
30
60
5
l
Necessary procedure after battery change
AND
Press and hold simultaneously
for 2 seconds or longer.
Press to reset the STOP-
WATCH second and minute
hands to the “0” position.
After the battery is replaced with a new one, or in case any of the hands should
move improperly, follow the procedure below to reset the
STOPWATCH
hands to “0”
position.
* The STOPWATCH second hand
turns counter clockwise, and then
returns to where it was.
s
Turn to set the time.
Push back in to normal position.
s
Pull out to second click.
s
* The STOPWATCH minute
hand moves correspond-
ingly with the STOPWATCH
second hand.
* The STOPWATCH hands
move quickly if the re-
spective buttons are kept
pressed.
B
A
CROWN
B
A
B
A
CROWN
CROWN
A: The hands move counterclockwise.
B: The hands move clockwise.
OR
s