Pulsar N945 User Manual

MODES AND DISPLAYS
There are two buttons and a crown as indicated in the
illustration below.
PULSAR ANALOGUE QUARTZ WATCH
WITH ALARM CHRONOGRAPH TIMER
Cal. N944, N945
FEATURES
This is a multi-display analogue watch featuring alarm,
stopwatch, countdown timer and dual time functions. The
mode changes simply by turning the crown.
■ TIME
Hour, minute and 24-hour hands
■ CALENDAR
Date is indicated by date indicator.
■ ALARM
The alarm is set on a 24-hour basis.
■ STOPWATCH (CHRONOGRAPH)
It can measure up to 12 hours in 1/10 seconds.
Split time measurement is also possible.
■ COUNTDOWN TIMER
Up to 60 minutes can be set with a preset function.
■ DUAL
TIME
The time of a different time zone can be displayed on a 24-hour
basis.

Pulsar N945 Specifications

General

Brand	Pulsar
Model	N945
Category	Watch
Language	English

Summary

Watch Functions and Settings

Functions of Crown and Buttons

Adjusting Hand Position

Procedure for adjusting hand positions after battery replacement or for improper movement.

Time and Calendar Settings

Time Setting

Step-by-step guide to setting the watch's time accurately.

Calendar Setting

Instructions for setting the date indicator on the watch.

Stopwatch Operation

Stopwatch Operation Overview

Overview of the stopwatch function and its measurement capabilities.

Stopwatch Measurement Types

Countdown Timer

Countdown Timer Setting

Steps to set the countdown timer using the crown and buttons.

Countdown Timer Operation

Maintenance and Care

Necessary Operation After Battery Change

Procedure to reset the IC and adjust hand positions after battery change.

Preserving Watch Quality