Pulsar N945 - Countdown Timer Setting; Countdown Timer Operation

Timer setting
• Turn t
he crown to set the mode indicator to “TIMER”.
The hour, minute, 1/10 second and timer second hands return
to the 12 o’clock position. Disregard the 24-hour and dual time
hands.
Ex
.) 40 minutes is set for
countdown.
Ex
.) The remaining time is 21
minutes and 43 seconds.
1. If the timer has been set previously, press “B”.
The minute hand moves to indicate the time set previously.
2.
3.
If you want to change the set time, or the timer has not been
s
et previously, pull out the crown to the second click.
Press “A” for clockwise setting of the minute hand or “B” for
counterclockwise setting.
* With each press of the button
, the hand moves one minute.
* The hand moves quickly if the button is kept pressed.
4. Push the crown back in to the normal position.
To start : Press “A”.
To stop : Press “A”.
To restart : Press “A”.
To reset : Press “B”.
Timer operation