Option 1
1. Install the IPS7 battery (4) in the battery compartment of the device.
2. Connect the USB Type-C cable (20) to the USB Type-C connector (10) of the
device.
3. Connect the other end of the USB cable (20) to the Power Adapter (21) by
removing the USB Type-A adapter.
4. Plug the Power Adapter (21) into a 100-240 V socket.
5. Wait until the battery is fully charged (indication in the status bar: ).
If the device is off, the LED indicator will display the battery charge
status:
To Next Page
Loading...
