Pulsar KRYPTON 2 - Page 14

External Power Supply
External power is supplied from an external source , such as a 5 V Power Bank .
 Attach the external power source to the USB Type - C connector 10  on the device .
 The device will switch to operation from the external power supply , while the IPS 7
battery will be gradually recharged .
 A battery icon  will appear on the display showing charge level as a percentage .
 If the device is operated from an external power source and the IPS 7 battery is not
connected , an icon  is displayed .
 Once the external power source is disconnected , the device will begin functioning
on battery power .
Attention !  Charging Power Bank IPS 7 batteries at air temperatures below 0 ° C can
result in reduced battery life . When using external power , connect Power Bank to the
switched - on device , which have worked for several minutes .