Pulsar KRYPTON 2 - Page 36

White Hot  is the default display mode .
To select an alternative palette , do the following :
 Press and hold the  М ENU 6  button to enter the main menu .
 Use the  UP 5/ DOWN 7  buttons to select  Colour Modes icon .
 Press the  М ENU 6  button briefly to enter the submenu .
 Use the  UP 5/ DOWN 7  buttons to select the desired palette .
 Press the  М ENU 6  button briefly to confirm the selection .
Tip :  to preserve brightness and contrast values when switching palettes , activate  User
Mode .
White hot – a black and white palette where black = cold ; white = hot
Black hot – a black and white palette where white = cold ; black = hot
Red Hot
Red Monochrome
Rainbow
Ultramarine
Violet
Sepia
Green
Attention ! The device should not be used to accurately measure temperature . The
images generated are based on temperature contrast rather than true temperature
readings .
Wi-Fi