Pulsar KRYPTON 2 - Page 38

Access Level Setup
This submenu allows you to set access levels of Stream Vision 2 application to your
device .
Access level  Owner . Stream Vision  user has complete access to all device ʼ s
functions .
Access level  Guest . Stream Vision  user has access only to real time video stream
from the device .
 Select the  Access Level Setup submenu with the UP 5/ DOWN 7 buttons .
 A short press of the  MENU 6  button opens the submenu
 Select  Owner  or  Guest  with the  UP 5/ DOWN 7 buttons .
 Confirm your selection with a short press of the  MENU 6  button .
Wi - Fi Band
This setting helps to solve smartphone connection issues in the following cases :
If your smartphone does not support 5 GHz Wi - Fi band , switch to 2.4 GHz .
Many Wi - Fi networks cause interference . In this case , switching between Wi - Fi
bands can improve the connection between the device and the smartphone .
 Select the  Wi - Fi Band option with the UP 5/ DOWN 7  buttons .
 Press the  М ENU 6  button briefly to enter the submenu .
 Press the  UP 5/ DOWN 7  buttons to select the Wi - Fi bandwidth – 5 GHz  or  2.4
GHz .
 Confirm your selection with a short press of the controller  MENU 6  button .
Device Information