EasyManua.ls Logo

Pulsar KRYPTON - Page 50

Pulsar KRYPTON
70 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connect
one
end
of
the
USB
cable
22
to
the
device
micro
-
USB
port
11
and
the
other
end
to
the
port
on
your
computer
.
Switch
the
device
on
with
a
short
press
of
the
ON
/
OFF
9
button
(
the
computer
will
not
detect
the
device
if
it
is
switched
off
).
The
device
is
detected
by
the
computer
automatically
and
no
drivers
need
to
be
installed
.
Two
connection
modes
will
appear
on
the
display
:
Use
as
power
and
Use
as
memory
card
.
Use
the
RIGHT
6/
LEFT
8
buttons
to
select
the
connection
mode
.
Press
the
MENU
7
button
briefly
to
confirm
the
selection
.
Use
as
power
When
this
mode
is
selected
,
the
computer
is
used
as
an
external
power
supply
.
The
icon
appears
in
the
status
bar
.
The
device
will
continue
operating
and
all
the
functions
are
available
.
A
battery
installed
in
the
device
will
not
be
charged
.
When
disconnecting
the
USB
from
the
device
connected
in
Use
as
power
mode
,
the
device
will
continue
to
operate
from
the
rechargeable
battery
if
it
is
present
and
provided
it
has
enough
charge
.

Related product manuals