Pulsar KRYPTON - Page 58

 section of the menu .
Software
Firmware update
Stream Vision 2
 Download free Stream Vision 2 App in  Google Play or  App Store .
 Connect your Pulsar device to your mobile device ( smartphone or tablet ).
 Launch Stream Vision 2 and go to section “ Settings ”.
 Select your Pulsar device and press “ Check firmware update ”.
 Wait for the update to download and install . Pulsar device will reboot and will be
ready to operate .
Important :
if your Pulsar device is connected to phone , please turn on mobile data transfer
 GPRS /3 G /4 G  to download update ;
if your Pulsar device is not connected to your phone but is already listed in
“ Settings ” > “ My devices ” section , you may use Wi - Fi to download update .
Find answers to frequently asked questions about using Stream Vision 2 here .
Stream Vision
 Download free of charge Stream Vision App on  Google Play  or  App Store .
 Connect your Pulsar device to your mobile device ( smartphone or tablet ).