Pulsar KRYPTON - Page 63

Solution
Return to the device coverage area .
Possible cause
Remote control battery low .
Solution
Install a new CR 2032 battery as follows : unscrew the screws on the rear cover of the
Remote Control , remove the cover , install a new battery , and screw the cover with
screws .
Residual horizontal lines and traces of
horizontally placed objects during
observation process.
Possible cause
Algorithms that are used for image processing might sometimes cause traces of
horizontal lines to temporarily appear on the image . This should not be considered as a
critical error .
Device malfunction
Solution
In case of any malfunctions during operation , try resetting the device by long pressing
the ON / OFF button for 10 seconds .