Pulsar KRYPTON - Page 69

When the device is used in low
temperature conditions the image quality
is worse than in positive temperatures.
Possible cause
In positive temperature conditions , objects being observed ( surroundings and
background ) heat up differently because of thermal conductivity , thereby generating a
high temperature contrast . Consequently , the image quality produced by the thermal
imager will be better .
In low - temperature conditions , objects being observed ( background ) will cool down to
roughly the same temperature , which leads to a greatly reduced temperature contrast
and a degraded image quality . This is normal for all thermal imaging devices .
Legal compliances and disclaimers
Attention ! A license is required for Thermal Imaging Front Attachment Krypton FXG 50
when exporting outside your country .
Electromagnetic compatibility . This product complies with the requirements of European
standard EN 55032 2015, Class A .
Caution ! Operation of this equipment in a residential environment could cause radio
interference .
Updates of the Product . The manufacturer reserves the right at any time , without
mandatory prior notice to the Customer , to make changes to the package contents
( subject to the applicable laws , if any ), design and characteristics that do not impair the
quality of the Product .
Repair . Repair of the product is available within 5 years after purchase of the product .