Pulsar PG5250B - Page 17

Operation
17
Stopping the Generator Set
When using gasoline
1.Turn off all the connected devices.
2.Allow the generator set run for a few minutes to cool down.
3.Stop the generator set by pressing and holding the engine switch in the
OFF position until the generator set stops.
4.Rotate the fuel valve lever back to the OFF position.
When using LPG
1.Turn off all the connected devices.
2.Allow the generator set run for a few minutes to cool down.
3.Turn off the LPG valve.
4.Push the engine switch to “OFF” position.