13
2000 PSI Pressure Washer
CLEAN-UP AND STORAGE
Shutting Down the Pressure Washer
WHEN FINISHED USING THE PRESSURE WASHER,FOLLOW THESE
STEPS TO SHUT DOWN THE UNIT:
• Turn the pressure washer to the OFF position.
• Turn off the water supply.
• Before disconnecting high-pressure hose connection, point the gun in a
safe direction and discharge the high-pressure water.
• Disconnect high-pressure hose from the pressure washer and gun.
• Disconnect garden hose from the pressure washer.
• Remove excess water from the pump by tipping the unit on both sides to
drain any remaining water from the inlet and outlet fittings.
• ro trid evomer ot retaw htiw hsulf dna retliF ekatnI retaW eht evomeR
debris. Return the filter once it is cleaned.
To Next Page
Loading...
