EasyManua.ls Logo

Pulsar RS 200 - Technical Specifications

Pulsar RS 200
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engine : 4 Stroke, Single Cyl.
Bore x Stroke : 72.0 mm x 49.0 mm
Engine Displacement : 199.5 cc
Compression Ratio : 11 + 0.5 : 1
Idling Speed : 1400 + 100 RPM
Max. Net Power : 18 KW at 9750 RPM
Max. Net Torque : 18.3 Nm at 8000 RPM
Ignition System : 12V ,DC
FI System : Single Point Injection
into manifold - BOSCH
Spark Plug : 3 Nos
Spark Plug Gap : 0.7 ~ 0.9 mm
Transmission : 6 speed constant
mesh
Gear Shifting Pattern : 1 Down 5 Up
Engine Lubrication : Pressurized oil supply
Engine Cooling : Liquid cooling
Starting Aid : Electric starter
Front & Rear Brake : Disc Brake
Fuel Tank Capacity
Full : 13 liters
Dimensions :
Length : 1999 mm
Width : 765 mm
Height : 1114 mm
Wheel base : 1363 mm
Ground clearance : 157 mm
Tyre Size
Front : 100/80-17,52P tubeless
Rear : 130/70-17,61P tubeless
Tyre Pressure
2
Front : 1.75 kgf/cm (25 PSI)
2
Rear (Solo) : 2.00 kgf/cm (28 PSI)
2
Rear (with pillion) : 2.25 kgf/cm (32 PSI)
Technical Specifications
1

Related product manuals