Pulsar TELOS - Page 48

This menu section allows you to change the interface language , set the date , time , units
of measure , return the device to factory default settings and perform memory card
formatting .
 Press and hold the  MENU 11  button to enter the main menu .
 Use the  UP 10/ DOWN 12  buttons to select the  General Settings icon .
 Press the  MENU 11  button briefly to enter the submenu .
 Choose the required menu item with  UP 10/ DOWN 12  buttons .
Language
Language selection
 Press the  MENU 11  button briefly to enter the  Language menu item .
 Use the  UP 10/ DOWN 12  buttons to select one of the available interface
languages : English , German , Spanish , French , Russian , Italian , Portuguese , Dutch ,
Danish , Norwegian , Swedish , Polish , Czech , Hungarian , Bulgarian , Finnish ,
Lithuanian , Latvian , Ukrainian .
 Press the  MENU 11  button briefly to confirm the selection .
 Press and hold the  MENU 11  button to save your selection and exit from the
submenu .
Date
Date setting
 Press the  MENU 11  button briefly to enter the  Date menu item . The date is
displayed in dd / mm / yyyy format .
 Use the  UP 10/ DOWN 12  buttons to select the desired year , month , and date .
Press the  MENU 11  button briefly to toggle between digits .