Pulsar TELOS - Page 68

 Attach the mounting plate to the tripod .
 Install the Telos LRF device into the tripod adapter  14  so that the rangefinder lens
aligns with the hole on the front of the tripod adapter 14 .
 Turn the handle of the tripod adapter  14  to position  .
 Level the Telos LRF horizontally and vertically using the tripod mounting plate .
Notes :
The tripod adapter is not designed to be mounted on a vehicle .
When adapter is installed , the user can move the rear part of the device up .
When the adapter knob is moved to the closed position  , the horizontal direction
of the device may shift slightly .
USB Connection