Pulsar VX42 - Start Mechanical Watch; Time Setting (No Calendar); Time and Date Setting (Date Calendar)

English
2
n
HOW TO START THE MECHANICAL WATCH (Cal. Y621)
1
Pull out to the rst click.
2
Turn to show the previous day’s date.
3
Pull out to the second click.
n
TIME/CALENDAR SETTING FOR MODELS WITH
DATE CALENDAR
To initially start your watch, swing it from side to side in a horizontal arc
for about 30 seconds.
* If the watch is worn daily, PULSAR's automatic mechanism will wind the mainspring
automatically through normal wrist movement.
n
TIME SETTING FOR MODELS WITHOUT CALENDAR
CROWN
1
Pull out.
2
Turn to set the time.
3
Push back.
10
CROWN