Pulsar YM62 - Setting Time and Adjusting Hands; Setting Main Time and Alarm

English
English
54
SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION
● This watch is so designed that the following are all made with the crown at the
second click position:
1) main time setting
2) alarm hand adjustment
3) stopwatch hand position adjustment
Once the crown is pulled out to the second click, be sure to check and adjust 1)
and 2) at the same time. If needed, 3) should also be adjusted then.
CROWN
Pull out to second click when the second hand is at the 12
o’clock position.
1) MAIN TIME SETTING
Hour hand
6
Minute hand
Small second hand
CROWN
Turn to set the hour and
minute hands.
* It is recommended that the hands be set
to the time a few minutes ahead of the
current time, taking into consideration
the time required to set the ALARM
hands and to adjust the STOPWATCH
hand position if necessary.
2) ALARM HAND ADJUSTMENT
● Set the ALARM hands to the time the main time hands indicate.