Change the Personality
You can change your system's personality at any time.
Changing a personality deletes all configuration files and system and user data. You must perform the basic
setup again to reestablish network connectivity. The installation process may take up to 20 minutes.
Do this to change the personality:
1. Start a console session.
2. Select option 4, System Operations.
3. Select option 5, Factory reset.
4. Enter the number corresponding to the personality for which you want to configure the PSA3000.
For example, if your screen looks like this:
Please select a factory-reset personality:
[1] Pulse Connect Secure (VPN)
[2] Pulse Policy Secure (NAC)
Press 1 to install the Pulse Connect Secure package. Press 2 to install the Pulse Policy Secure package.
5. Follow the prompts to complete your configuration.
To change the personality from the administrator Web console:
1. In the admin console, choose Maintenance > System > Change Personality.
2. Click Browse to select the service package to install.
3. Click Change Now.
To Next Page
Loading...
