Access the Web Admin Interface
1. Launch a web browser from a laptop that is network connected.
2. Point the browser at the same IP address that was assigned to the internal port followed by /admin (for
example, https://a.b.c.d/admin).
3. When prompted with the security alert to proceed without a signed certificate, click Yes . When the
administrator sign-in page appears, you have successfully connected your device to the network.
4. On the sign-in page, enter the administrator username and password you created earlier. Then click Sign In.
The administrator Web console opens to the Overview page.
Licensing the System
After you install the device and perform basic setup, you are ready to license it.
To license your device, follow instructions received in an email from Pulse Secure. For more information, see
https://www.pulsesecure.net/support.
The device uses the common machine and organization names to create a self-signed digital certificate for
use during product evaluation and initial setup.
We strongly recommend that you import a signed digital certificate from a trusted certificate authority (CA)
before you deploy the device for production use.
To Next Page
Loading...
