Need help?Do you have a question about the Pulse PMX1604 and is the answer not in the manual?
Explains safety symbols like lightning flash, exclamation mark, WEEE, and CE marking.
Details the phantom power switch and main output connections (1/4" and XLR).
Explains channel inserts, ALT 3-4 outputs, control room outputs, and IEC mains inlet.
Covers Speakon sockets, terminal posts, and ventilation for the mixer's amplifier.
Details MIC 1 and LINE IN inputs, plus LOW CUT and GAIN controls.
Explains EQ adjustments, AUX/FX controls, and the PAN dial for stereo positioning.
Covers MUTE, CLIP, SOLO functions, channel faders, and aux/FX sends/returns.
Details stereo aux return sockets, level adjustments, and tape input/output.
Explains headphone socket, monitoring controls, and source selection buttons.
Explains MODE switch (SOLO/PFL) and LED display for signal status and levels.
Describes ALT 3-4 and MAIN MIX faders for overall signal control.
Explains the program dial and the integrated 24-bit multi-effects processor.
Details balanced XLR connections and 1/4" TS footswitch connectors.
Explains unbalanced 1/4" TS, headphones 1/4" TRS, and balanced 1/4" TRS connections.
General| Channels | 16 |
|---|---|
| Faders | 60mm |
| EQ | 3-Band |
| Aux Sends | 4 |
| Type | Analog |
| Line Inputs | 8 |
| Phantom Power | Yes |
To Next Page
