14
SPECIFICATION TABLE
Power
230V AC 50Hz
Mixer spec
PMX1204: 2 x 200Wrms / 8 ohms
2 x 300Wrms / 4 ohms
PMX1604: 2 x 300Wrms / 8 ohms
2 x 500Wrms / 4 ohms
Mic pre amps (4 mics PMX1204 & 8 mics PMX1604)
130dB Range for 24-bit, 192 kHz sampling rate inputs
60dB Gain range
Total Harmonic Distortion: 0.0007% (20Hz to 20 kHz)
24 Bit digital stereo FX processor
3 Band equaliser
2 Aux sends per channel: 1 pre/post fader switchable, 1 post fader
2 Stereo aux returns with exible routing
2 Sub groups with separate outputs for added routing exibility
Peak LEDs, mute / alt 3-4, SOLO and PFL functions on all channels
Balanced line inputs with +4 / -10 level section
FX send control per channel
Control room / phones output with multi-input source matrix
Tape inputs assignable to main mix or control room/phones outputs
+48V Phantom power
To Next Page
Loading...
