Section 6
Menu Descriptions
**Note: Not all modes will show all listed functions.
PUMA 5 modes
Contact - sets the recorder to the Contact mode.
Tactical - sets the recorder to the Tactical mode.
Dictation - sets the recorder to Dictation mode.
File
Delete file - permanently deletes the file.
Delete Section - permanently deletes a user defined section of the file (Dictation mode only).
Lock/EOL - locks the file to prevent editing.
Priority - marks the file as a priority '
!'
(Dictation mode only).
Index set - sets an index mark in the file (Dictation mode only).
Author (software setting).
Work Type (displays mode used in recording).
File Information - displays information about the file. File number, name, date, author, mode.
Record
Profile - set the mic sensitivity and recording format (Dictation mode only).
Record notification beep - turns the beep tone on or off when pressing the record button.
Edit mode - selects the Overwrite, Insert or Append mode (Dictation mode only).
Voice Activation - turns the voice activation function on or off.
Display
Brightness - increases or decreases the brightness of the display screen.
Backlight - sets the amount of time the backlight remains on full brightness.
Record lamp - selects if the RED LED on the top of the recorder will be on or off during recording.
Language - sets the language that will be used for the menus and display.
Device
Beep - selects the beep tone on or off for information events, such as when index marks are reached or when playback reaches
the end of a file. (Does not affect the Record notification beep).
Power save - sets the amount of time before the recorder enters Power save mode.
Date & time - sets the date and time.
Device information - displays information such as remaining recording time, serial number and firmware version.
USB charge - selects the battery charging rate. Most newer computers will be able to use the Fast (500mA) setting. If the USB
port of your computer does not supply enough power capacity, charging may not be successful and you should set the USB charge
option to Slow (100mA). You may also use an optional USB power adapter.
USB audio - allow the computer to use the recorder as the audio playback device via the USB cable.
Hands free mode - for use with the optional docking cradle and optional foot switch to control record and playback functions.
Noise Reduction - reduces background noise during playback when listening to quiet voices recorded in a noisy environment.
Diagnosis file - writes a diagnosis file to the memory card for error analysis.
Reset settings - resets all menu settings to factory defaults.
To Next Page
Loading...