PumpSpy Smart Outlet 2.0 - Solid Green; Solid Red

- 7 -
STATUS INDICATOR LED
The PumpSpy Smart Outlet 2.0 contains a Status Indicator LED
ring around the top outlet receptacle. The color of the Status
Indicator LED can be Solid Green, Solid Amber, Solid Red, or
Blinking Red.
Each color has a specic meaning.
Solid Green
• “All clear” status.
• No active alerts.
• Connected to WiFi.
Solid Amber
• In WiFi setup mode.
• The device will be in WiFi setup mode for 5
minutes before timing out.
Solid Red
• An alert is active.
-OR-
• Not connected to a WiFi network.
Blinking Red
• The device timed out of WiFi setup mode.
-OR-
• The device is searching for a WiFi network.
This happens after entering a network’s
credentials.