PumpSpy Smart Outlet User Manual

Setting up your PumpSpy Sump Pump Smart Outlet is
very easy and only takes a few minutes. You should setup your outlet
at a convenient location in your home and move it to your sump
pump later. Don’t worry, the Smart Outlet will remember your
settings when you unplug it.
STEP 1: Download and Install the PumpSpy App from
the App Store.
STEP 2: Open the app and create a new PumpSpy Account.
• After entering your info, press Done.
• Press the home button on your Apple device.
STEP 3: Plug in the PumpSpy Smart Outlet.
• Plug the Smart Outlet into any AC outlet.
• The LED ring will light up and turn yellow (setup mode).
• If the LED ring is not yellow, gently press and hold the button with the
PumpSpy logo. The unit will turn yellow/enter setup mode after 3 seconds.
STEP 4: Connect to the PumpSpy Smart Outlet
• On your Apple device, open Settings.
• Select WiFi.
• Select the WiFi network named “PumpSpy.”
• Press the home button on your Apple device.
STEP 5: Setup the PumpSpy Smart Outlet
• Open the PumpSpy app.
• The PumpSpy app will ask your permission to send you notications. Click OK.
• Select your WiFi network from the list of available networks.
• Enter the password for the selected WiFi network and press Done.
• The LED ring will turn green. A Green ring means the outlet is connected to
PumpSpy and is ready for use.
• A Success message will be displayed once connected. Press OK.
• Continue the setup process on the app by entering the location
of the Smart Outlet.
STEP 6: Enter Alert Contacts
• On the PumpSpy App, select Contacts.
• Following the onscreen prompts, enter cell phone numbers and/or email
addresses that should receive PumpSpy alerts.
STEP 7: Connect Your Sump Pump to the Smart Outlet
(
Refer to Owner’s Manual
)
STEP 8: Install the High Water Sensor
(
Refer to Owner’s Manual
)
SMART OUTLET SETUP INSTRUCTIONS
WATCHING YOUR SUMP PUMP SYSTEM 24
/
7
1.
2.
3.
4.
5.
7.
8.
6.
PumpSpy
RED LED
Cannot connect to Internet,
or High Water Alarm

PumpSpy Smart Outlet Specifications

General

Product Type	Smart Outlet
Connectivity	Wi-Fi
App Support	PumpSpy App
Surge Protection	Yes
Voltage	120V
Wi-Fi Connectivity	2.4 GHz
App Control	Yes
Energy Monitoring	Yes
Scheduling	Yes
Remote Control	Yes
Compatibility	Works with Alexa and Google Assistant
Power Rating	15 Amps

Summary

PumpSpy Smart Outlet App Setup

Download and Install PumpSpy App

Download and install the PumpSpy mobile application from the App Store or Google Play.

Create PumpSpy Account

Open the app, create a new PumpSpy account, and press Done on your device.

Plug in Smart Outlet

Plug the Smart Outlet into an AC outlet and ensure the LED ring turns yellow.

Connect to PumpSpy Wi-Fi

Connect your device's Wi-Fi to the "PumpSpy" network via device settings.

Configure Smart Outlet

Open the app, select your Wi-Fi, enter the password, and confirm connection.

Enter Alert Contacts

Add phone numbers and email addresses in the app to receive alerts.

Connect Sump Pump

Connect the sump pump to the smart outlet as per the owner's manual.

Install High Water Sensor

Install the high water sensor, referring to the owner's manual for instructions.

Manual Device Setup

Connect to PumpSpy Wi-Fi Network

Connect your Apple/Android device to the PumpSpy device's Wi-Fi network.

Access Provisioning Page

Open a web browser and navigate to the specified IP address for provisioning.

Select Network and Enter Password

Choose your home Wi-Fi network and input its password on the provisioning page.

Confirm Connection and Submit Serial

Verify Wi-Fi indicator turns green, then open app to connect device manually.