PURE Chronos CD Series 2 User Manual

6
Changing stations
103.5MHz
Classical music
89.05MHz
Scanning...
FM tuning mode
Manual Tune
Listening to FM radio
Changing the information shown on-screen
Chronos CD can display different information relating to the FM station you are listening to.
To change the information shown:
1. Press Menu and select Display.
2. Use the Navigation dial to cycle through the following options and push to select one:
Radio Text: Scrolling text and information broadcast by the station.
Date: The current date.
Switching between stereo and mono
Select Stereo (default) or Mono signal mode − mono may improve
audio clarity where stereo signals are weak.
To switch between FM Stereo and Mono modes, Press Menu and
select FM stereo mode.
Using Presets
Store up to 15 DAB and 15 FM radio stations for quick access to your favourites. You set
presets in the same way as for digital radio stations (Page 5).
To change stations, press the Stations button, then rotate the
Navigation dial.
When listening to FM there are two tuning modes, Manual and
Seek (default):
Seek: Rotating the Navigation dial scans to the next/previous
station.
Manual: Rotating the Navigation dial tunes down or up in steps
of 0.05 MHz
By default, Chronos CD is set to Seek.
To change the tuning mode, press Menu when listening to FM and
select FM tuning mode.
FM stereo mode
Mono

PURE Chronos CD Series 2 Specifications

General

Brand	PURE
Model	Chronos CD Series 2
Category	Clock Radio
Language	English