PURE Chronos iDock Series 2 User Manual

9
7. Select ‘Set volume’ and adjust the volume level for the alarm from 1 (very quiet) to 16 (very
loud) using the +/− buttons and Select to confirm.
That’s it! You can see which alarms are currently switched on by looking at the
numbered alarm clock icons on the screen, in either active or standby mode.
For example:
You can change alarm settings by pressing Alarm when Chronos iDock is switched on or in standby
mode, selecting the alarm number and changing settings as described above.
To stop an alarm
When an alarm is sounding press either the Alarm or Standby button to stop the alarm
sounding. Pressing Standby when a radio alarm is sounding will also switch the unit off.
To snooze an alarm
When an alarm is sounding press the Snooze button or the Play/Pause button on the remote
to silence the alarm for nine minutes (the default snooze time).
Changing the alarm snooze time
You can change how long the alarm snoozes for. Press Alarm, scroll to ‘Snooze time’ and press
Select and then adjust the snooze time between 5 and 60 minutes using +/−
To wake to a track of your choice: set an iPod alarm, play a track on your
iPod (using the iPod controls or the remote) and then switch the unit into
standby or change the source. The iPod will pause the track and power down.
Tip
EXaVX]APSX^
2^]cPRcdbfaX
Alarm 1 is
currently set
or or
or
)TIZU
)TIZU


B]^^iTcX\T
;MTMK\

PURE Chronos iDock Series 2 Specifications

General

Brand	PURE
Model	Chronos iDock Series 2
Category	Clock Radio
Language	English