PURE Chronos iDock Series 2 User Manual

5
Listening to DAB and FM
Changing stations
DAB
FM
Press to step down or up 0.05 MHz
Press and hold to scan to next or previous station
Changing the information shown on screen
Press the Info button and repeat to switch between:
1. Scrolling text broadcast by most DAB stations and FM (RDS) stations (default mode).
2. The content of the current DAB or FM (RDS) station, e.g., Pop Music.
3. The DAB multiplex in which the current station is broadcast, e.g., Digital1.
4. Time and date updated regularly by the DAB signal.
5. The channel of the current DAB Multiplex, e.g., 12B.
6. DAB signal data rate and a stereo or mono indicator.
7. DAB signal quality: 85 to 100 Good, 70 to 84 OK, 0 to 69 poor.
Note: the Info button only works in FM if the station has RDS data.
Press and hold the Select button in DAB to display a meter indicating signal strength.
textSCAN™ − pause and control scrolling text (DAB & FM)
Press the Select button when listening to a station to pause and control the scrolling text.
112APSX^!
0\hbcTahc^dac


112APSX^!
112A%<
;MTMK\




1VNW
Exit
;MTMK\


GcaP112
_PVTR^\X]Vd_
;MTMK\
Want to jot down a song title or competition phone number from the
scrolling text? Use textSCAN™ to pause the text and check the details.
Tip
112APSX^%<dbXR
=^f_[PhX]V)2[d

PURE Chronos iDock Series 2 Specifications

General

Brand	PURE
Model	Chronos iDock Series 2
Category	Clock Radio
Language	English