21
Help and specifications
Hints and tips
I cannot connect to my wireless network
Ensure that your Contour is within range of your wireless router and that you are not
located in a dead spot.
The audio and network connection keeps dropping when using Wi-Fi
If using an iPhone, iPod touch or iPad, make sure you’re running the latest version
of iOS. Your Wi-Fi may be congested by other networks on the same or close by
channels. Consult your router documentation or contact Pure support.
Technical specifications
Dock compatibility Supports most iPod, iPhone and iPad models. For the latest
information, check the compatibility table on our website:
www.pure.com/products/ipod-compatibility.
Speakers
2 full-range 3" speaker drivers
.
Audio output 2 x 10W RMS.
Input connectors 12V DC, 2.4A power adapter socket. 30 pin/lightning socket
for iPod/iPhone/iPad
connector. 3.5mm Aux-in for auxiliary
devices. Ethernet
socket.
LCD display Custom auto-dimming LCD display, large text and feature
icons.
Remote control Infrared remote control. CR2025 button cell battery
included.
Mains power supply Adapter: Input: AC 100 - 240V~, 50/60 Hz, 0.9A;
Output: DC 12V, 2.4A
Main unit: DC 12V , 2.4A
Dimensions 290mm wide x 165mm high x 125mm deep.
Approvals CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at
http://www.pure.com/R&TTE-DoC.
Australian C-Tick N1600 and Electrical Safety.
Contour_i1_Air_manual_Aus_v1.indb 21 7/29/2013 4:29:55 PM
To Next Page
Loading...